TM018 Seismic Velocity Vibration Transmitter
The velocity output is available in peak or RMS.
- Low cost online means of monitoring with the capability of interfacing direct into PLC, BMS or
any 4-20mA input module. Proven use in vibration monitoring for offline applications using commercially available data collectors. - Protecting…
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Technical Performance
- Mounted Base Resonance: 5 kHz min.
- Velocity Ranges: 0-10 to 0-100mm/sec RMS, PK (5 ranges)
- Frequency Response: 10Hz to 1 kHz ±5%
- Isolation: Base isolated
- Measurement Range: 50 g peak
- Transverse Sensitivity: Less than 5%
Electrical
- Output Current: 4-20 mA DC proportional to RMS velocity (mm/s)
- Supply Voltage: 15-30 Volts DC (for 4-20 mA)
- Setting Time: 2 seconds
- Output Impedance: Loop Resistance 600 Ohms max. at 24 Volts
- Case Isolation: ＞ 108 Ohms at 500 Volts
Environmental
- Operating Temperature Range: -25℃ to 90℃
- Sealing: IP65、IP67、IP68
- Maximum Shock: 5000g
Mechanical
- Case Material: Stainless Steel
- Sensing Element/Construction: PZT/Compression
- Mounting Torque: 8 Nm
- Weight: 155 gms (nom)
- Mounting Threads: See 'How to order' table
- Options: Ranges, filters, mating cable, assemblies,
intrinsically safe
TM016 Velocity Vibration Transmitter
Velocity is the preferred measurement for most rotating machines with rolling element bearings and the TM016 is a precision solid state loop powered sensor that measures velocity vibration levels and provides a 4-20mA output proportional to the overall vibration level. The 4-20mA velocity output is interfaced into a PLC, DCS or other 4-20mA input devices. The TM016 is easy to install. Drill and tap a hole on or near the bearing housing and connect the two wire output to monitor, record vibration levels and alarm or shutdown on excess vibration levels. The velocity output is available in peak or RMS.
 |
Features
|
